Manufacturing Automation Products
and Solutions

Bring intelligence, speed, and cost-effectiveness to the shop floor with manufacturing automation solutions that leverage Digi technology. Our sensor technology and industrial automation controls reliably capture and securely feed real-time data to factory automation systems to improve process efficiency, increase worker safety, and improve product quality.
Digi XBee Intelligent Edge Controller

Digi XBee Intelligent Edge Controller

Coming soon

Cloud-managed LoRaWAN smart industrial IoT solution for edge sensors and systems

  • Low-Power Wide-Area Network - LPWAN
  • 80x local intelligent edge rules and unlimited cloud-based rules
  • Cloud-based configuration
  • On-demand cloud polling and configuration for any Modbus register
  • Device portal
  • Intelligent edge processing
  • Sub-second local monitoring and alarms
  • Mobile provisioning app
  • Digi X-ON cloud platform for easy management
  • Typical range up to 15 km (10 miles)
Add to compare
Digi ConnectCore 8X SBC Pro

Digi ConnectCore 8X SBC Pro

Intelligent and connected single board computer based on the NXP i.MX 8X; with scalable dual/quad-core performance for industrial IoT applications

  • Industrial i.MX 8X quad/dual-core SOM and SBC platform family
  • Compact Pico-ITX form factor (100 mm x 72 mm)
  • Power management with both hardware and software support for low-power designs
  • Multi-display and camera capabilities with hardware acceleration
  • Pre-certified dual-band 802.11a/b/g/n/ac 2x2 and Bluetooth® 5 connectivity
  • Seamless cellular modem and Digi XBee® 3 integration
  • Built-in Digi TrustFence® device security
  • Yocto Project® Linux® and Android™ support
Add to compare
Digi Connect Sensor+ with Digi Remote Manager

Digi Connect Sensor+ with Digi Remote Manager

Easy-to-install and roll-out ready, battery-powered cellular gateway solution

  • Weatherproof enclosure with wide temperature range makes it ideal for use in all environments
  • Configurable read and report intervals with threshold and delta alarms
  • Multiple configurable I/O make it possible to connect to multiple sensor types
  • Modbus protocol support
  • External, configurable power outputs eliminate the need for sensor power supplies
  • Global cellular coverage
  • Digi Remote Manager® platform for easy management
  • Digi Connect Sensor+ SkyCloud is now available
Add to compare
Digi ConnectCore 6+ SBC

Digi ConnectCore 6+ SBC

NXP i.MX6Plus based surface-mount module solution with scalable, quad-core performance and integrated wireless connectivity

  • Compact off-the-shelf SBC
  • Scalable capabilities and i.MX6Plus performance
  • Gigabit Ethernet and pre-certified dual-band 802.11ac + Bluetooth® 5
  • Seamless cellular modem and Digi XBee® integration
  • Complete set of available peripherals and interfaces with customization options
  • Designed for flexibility and reliability
  • Yocto Linux and Android software platform support
  • Industrial operating temperature available
Add to compare
Digi ConnectCore Cloud Services

Digi ConnectCore Cloud Services

New

Integrated edge-to-cloud connectivity

  • Industry-leading cloud and edge tools for rapid device deployment, and easier asset management
  • Automate mass firmware and software updates to enhance functionality, stay in compliance and scale your deployment
  • Access data from edge devices that were previously out of reach
  • Integrate device data through open APIs to gain deeper insights and control with third-party applications
  • Monitor network, device and asset performance and security with bi-directional communications
  • Receive real-time alerts and detailed reports on network health and device conditions
Add to compare
Digi ConnectCore Security Services

Digi ConnectCore Security Services

New

Keep your product secure during the entire product lifecycle

  • Make security easier and more accessible by providing a curated security analysis
  • Provide visibility on the security status of Digi Embedded Yocto (DEY), making vulnerability reports available
  • Identify security issues in Digi ConnectCore® DEY-based customer products
  • Monitor and maintain security in devices throughout the entire product lifecycle
  • Utilize Digi engineering and consulting services to help resolve security issues
  • Take advantage of SBOM analysis and CVE monitoring
  • Review binary image scans for additional vulnerability insights
Add to compare
Digi IX15 IoT Gateway and Cellular Router

Digi IX15 IoT Gateway and Cellular Router

Programmable IoT gateway connects Digi XBee-enabled devices to remote applications over cellular and Ethernet

Add to compare
Digi ConnectCore 6UL SBC Pro

Digi ConnectCore 6UL SBC Pro

Powerful, secure, pre-certified connected Single Board Computer in standard form factor with complete design flexibility.

  • Powerful and flexible off-the-shelf solution in Pico-ITX form factor
  • Production-ready with minimal hardware design effort
  • Rugged design with industrial operating temperature range
  • Pre-certified dual-band 802.11ac Wi-Fi connectivity
  • Bluetooth® 5, with Bluetooth Low Energy support
  • Out-of-box support for cellular connectivity
  • On-board NFC Forum Type 2 compliant tag
  • Dual 10/100 Mbit Ethernet networking
  • Integrated display and camera capabilities
  • Rich interface and peripheral support
  • Complete Yocto Project® Linux® BSP with source code
  • Digi TrustFence® device security framework
Add to compare
Digi ConnectCore 6N SBC

Digi ConnectCore 6N SBC

Reliable and compact NXP i.MX6 SBC family with integrated Ethernet, Wi-Fi, Bluetooth, Digi XBee and cellular connectivity options

  • Compact off-the-shelf SBC family
  • Scalable capabilities and i.MX6Quad/Dual performance
  • Gigabit Ethernet and pre-certified dual-band Wi-Fi 5 and Bluetooth® 5.0
  • Ready for cellular connectivity and Digi XBee® RF
  • Complete set of available peripherals and interfaces with customizable options
  • Designed for flexibility and reliability
  • Windows® Embedded Compact, Yocto Project® Linux® and Android™ software platform support
  • Industrial operating temperature available
Add to compare
Digi ConnectPort X4 Gateway

Digi ConnectPort X4 Gateway

Remote M2M networking gateways designed for commercial grade and rugged outdoor applications

  • WAN connectivity via LTE or 3G HSPA+ Networks
  • Local wireless connectivity through Zigbee
  • Local wired connectivity through RS-232/422/485, 2 analog inputs and 2 digital inputs
  • Small commercial grade enclosure or NEMA 4X/IP66 case
  • Full routing/IP filtering plus IPsec/SSL VPNs with DES, 3DES or AES encryption
  • Easy development environment via DIA and Python scripting as part of Digi ESP IDE
  • Support for Modbus/Modbus TCP
  • Digi Remote Manager® support for easy setup, mass configuration and management
Add to compare
Digi IX20 4G LTE router

Digi IX20 4G LTE router

Versatile networking for critical applications — rugged, secure LTE router

  • Compact and economical cellular routing platform with industrial feature set
  • Redundant connectivity with dual SIMs and Digi SureLink®
  • FirstNet Trusted™ models for first responder communications
  • Global bands support and options for global distribution, deployment and management
  • Built-in Digi TrustFence® for device security, secure encrypted connections, ongoing monitoring and support
  • Digi Remote Manager® platform for easy setup, mass configuration and management
  • Dual Ethernet ports and single serial (RS-232) port
  • Digi WAN Bonding for WAN aggregation and immediate failover
  • Migrating from a WR-series device? Get information and tools to setup your new IX-series router.
Add to compare
Digi IX30 Industrial Cellular Router

Digi IX30 Industrial Cellular Router

Intelligent 4G LTE router designed for critical infrastructure and industrial applications

  • Global LTE and HSPA+ support and certification on major carrier networks around the world
  • Ethernet, serial I/O and Modbus bridging
  • Low-power feature can be easily configured for remote and off-grid applications
  • Extremely resilient cellular connection through Digi’s patented SureLink®, VRRP+ protocol and dual SIM slots
  • Dedicated GNSS receiver supporting GPS, GLONASS, BeiDou and Galileo
  • License-free enterprise software: VPN, firewall, logging and authentication
  • Digi Remote Manager® platform for easy setup, mass configuration and management
  • Rugged enclosure, optimized for DIN rail or shelf mounting
  • C1D2 and ATEX rated; NEMA TS2 temperature rated
  • Digi WAN Bonding for 5G/LTE WAN aggregation and immediate failover
Add to compare
Digi XBee 3 Global and Low-Power LTE-M/NB-IoT

Digi XBee 3 Global and Low-Power LTE-M/NB-IoT

Now available

Compact, flexible cellular connectivity for IoT devices and gateways

  • One hardware platform for use on LTE-M/NB-IoT networks with multi-band support to integrate with many carriers
  • FCC certified and carrier end-device certified
  • Integrated MicroPython programmability for edge compute
  • MQTT support for Microsoft Azure and Amazon AWS
  • Low power consumption optimized for long battery life
  • Integrated with Digi TrustFence® security framework
  • Easy to manage with Digi XBee Studio® and Digi Remote Manager®
  • Digi XBee® Transparent and API modes simplify design
  • CE/RED certified and network tested
  • 2G fallback/GNSS
  • Bluetooth® Low Energy for beaconing, connecting to Bluetooth sensors and local configuration using the Digi XBee® Mobile app
  • Includes SIM*, ready to activate and begin using
Add to compare
Digi XBee Network Assistant

Digi XBee Network Assistant

New

Deploy, visualize and configure any local RF network installation

  • Automatic network discovery
    Click the Network Discovery button and see all nodes in the range.
  • Network visualization and mapping
    Using Google Maps or a static map image, place your Digi XBee devices to indicate node locations.
  • Network strength
    Analyze and debug the network strength between nodes.
  • Firmware and configuration
    Batch update firmware and configuration settings for all nodes on a network.
Add to compare
Z45 Industrial Controllers

Z45 Industrial Controllers

The complete SCADA system in a box with sophisticated PLC-like automation control on the same platform that provides communications

  • Integrated interfaces for analog, digital, hex and pulse information processing
  • Modbus client and server configurations
  • Built-in digital and analog input, digital output
  • Networks connectivity over USB, Ethernet and serial interfaces
  • On-board dashboard display with gauges, indicators and charts
  • Self-provisioning devices report to SkyCloud for complete visibility of assets
  • LTE coverage on all bands for North American carriers with 3G HSPA fallback
  • Automatic carrier provisioning and dual-SIM failover support
Add to compare
Digi ConnectCore 8X SOM based on NXP i.MX 8X

Digi ConnectCore 8X

Intelligent and connected embedded system-on-module based on the NXP i.MX 8X, with scalable dual/quad-core performance for industrial IoT applications

  • Industrial i.MX 8X quad/dual-core SOM and SBC platform family
  • Digi SMTplus® form factor (40 mm x 45 mm) for ultimate reliability and design freedom
  • Power management with both hardware and software support for low-power designs
  • Multi-display and camera capabilities with hardware acceleration
  • Pre-certified dual-band 802.11a/b/g/n/ac 2x2 and Bluetooth® 5 connectivity
  • Seamless cellular modem and Digi XBee® 3 integration
  • Cloud and edge-compute services integration
  • Built-in device security with Digi TrustFence®
  • Remote management with Digi ConnectCore® Cloud Services
  • Digi Embedded Yocto  Linux® and Android support
Add to compare
Digi IX40 5G Edge Computing Industrial IoT Solution

Digi IX40 5G Edge Computing Industrial IoT Solution

Coming soon

5G edge computing industrial IoT cellular router solution, purpose-built for Industry 4.0

  • Global 5G and LTE support and certification on major carrier networks around the world
  • Digi Containers to enable powerful, cost-efficient applications
  • Integrated edge computing capabilities for hosting containerized applications and custom solutions
  • Ethernet, SFP, serial, I/O and Modbus bridging
  • Extremely resilient cellular connection through Digi’s patented SureLink®, VRRP+ protocol and dual SIM slots
  • GNSS receiver supporting GPS, GLONASS, BeiDou and Galileo
  • License-free enterprise software: VPN, firewall, logging and authentication
  • Digi Remote Manager® platform for easy setup, mass configuration and management
  • Rugged enclosure with options for DIN rail or shelf mounting
  • Digi WAN Bonding for 5G/LTE WAN aggregation and immediate failover
Add to compare
Digi XBee 3 Cellular LTE-M/NB-IoT modem

Digi XBee 3 Cellular LTE-M/NB-IoT

NRND

Compact, flexible cellular connectivity for IoT devices and gateways

  • One hardware platform for use on LTE-M/NB-IoT networks with multi-band support to integrate with many carriers
  • FCC certified and carrier end-device certified
  • Integrated MicroPython programmability for edge compute
  • MQTT support for Microsoft Azure and Amazon AWS
  • Low power consumption optimized for long battery life
  • Enhanced with Digi TrustFence® security framework
  • Manage and configure with Digi XCTU® and Digi Remote Manager®
  • Digi XBee® Transparent and API modes simplify design
  • CE/RED certified and network tested
  • Bluetooth® Low Energy for beaconing, connecting to Bluetooth sensors and local configuration using the Digi XBee Mobile app
  • Modem includes SIM and ready to activate. Visit shop.digi.com to activate service.
Add to compare
Rabbit<span>®</span> SBC BL4S200 Series

Rabbit SBC BL4S200 Series

NRND

Single-Board Computer

  • Uses Rabbit® 4000 and Rabbit 5000 microprocessors
  • Choice of Wi-Fi or Ethernet connectivity
  • 40 digital I/O and up to 5 serial ports
  • 8 input and 2 output analog channels
  • Advanced I/O subsystem is software configurable reducing the load on the processor
Add to compare
Digi ConnectCore 6UL

Digi ConnectCore 6UL

Intelligent and connected embedded system-on-module based on the NXP i.MX6 UL, with turnkey Linux software support in a stamp-sized form factor

  • Stamp-sized, secure, connected System-on-Module platform
  • NXP i.MX6UL, Cortex-A7 at 528 MHz
  • 256 MB / 512 MB / 1 GB NAND flash, 256 MB / 512 MB / 1 GB DDR3
  • Patent-pending low-profile Digi SMTplus™ form factor
  • Integrated Digi Microcontroller Assist™ for 2.5 µA ultra-low power modes
  • Pre-certified 802.11a/b/g/n/ac + Bluetooth® 5 option
  • Integrated dual 10/100 Ethernet connectivity
  • Digi TrustFence® embedded device security framework
  • Royalty-free embedded Linux® software platform
  • Turnkey development available from Digi WDS
Add to compare
Digi WR31

Digi WR31

NRND

Intelligent 4G LTE router designed for critical infrastructure and industrial applications

  • Global HSPA+ and 4G LTE support and certification on major carrier networks around the world
  • Ethernet, serial I/O and Modbus bridging
  • Extremely resilient cellular connection through Digi’s patented SureLink®, VRRP+ protocol and dual SIM slots
  • Dedicated GNSS Receiver supporting GPS, GLONASS, BeiDou, Galileo 
  • License-free enterprise software: VPN, firewall, logging and authentication
  • Digi Remote Manager® platform for easy setup, mass configuration and management
  • Rugged enclosure, optimized for DIN rail or shelf mounting
  • C1D2 and ATEX rated; NEMA TS2 temperature rated
  • Migrating from a WR-series device? Get information and tools to setup your new IX-series router.
Add to compare
Rabbit<span>®</span> SBC BL4S100 Series

Rabbit SBC BL4S100 Series

NRND

Single-Board Computer

  • Rabbit 4000 running at 40 MHz
  • On-board Rabbit RIO® device for exceptional I/O functionality and flexibility
  • Web Server functionality
  • Easy implementation of mesh networking with known good hardware
  • Dynamic C® software environment to reduce development time
Add to compare
Digi ConnectCore 6+

Digi ConnectCore 6+

NXP i.MX6Plus based surface-mount module solution with scalable, quad-core performance and integrated wireless

  • Scalable Cortex-A9 multi-core performance
  • Cost-effective, reliable, low-profile surface-mount module form factor
  • Pre-certified 802.11a/b/g/n/ac and Bluetooth® 5
  • Smart Power Management Architecture with PMIC
  • Yocto Project Linux software platform support
  • Reliable design with IEC 60068 and HALT verification
  • Dedicated on-module security + authentication controller
  • Designed for long-term availability
Add to compare
Digi XBee SX RF Modems

Digi XBee SX RF Modems

1-Watt industrial-grade 900 MHz RF modem with best-in-class range and power consumption for wireless cable replacement

  • Adjustable output power up to 1-Watt achieves up to 65 mile range*** with high gain antenna
  • Interfaces options include RS-232, RS-485, USB, Analog I/O and Digital I/O
  • DigiMesh® networking topology for redundancy and reliability
  • 256-bit AES encryption for secure data communications
  • Rugged metal enclosure and -40º C to 85º C operating temperature for industrial applications
  • Fully certified for use in free, unlicensed 900 MHz band
Add to compare
Rabbit<span>®</span> SBC LP3500 Series

Rabbit SBC LP3500 Series

NRND

Single-Board Computer

  • Low power consumption less than 100 uA in power save mode
  • 8 A/D inputs with 12 bit resolution
  • Digital outputs can sink up to 200 mA
  • 6 serial ports for multiple device connectivity
  • 16 protected digital inputs
Add to compare
Digi ConnectCore 6 / 6N

Digi ConnectCore 6N

NXP i.MX6 based surface-mount module solution with scalable, single-/multi-core performance and integrated wireless

  • Scalable Cortex®-A9 multi-core performance
  • Cost-effective, reliable, low-profile surface-mount module form factor
  • Pre-certified 802.11a/b/g/n/ac and Bluetooth® 5.0
  • Smart Power Management Architecture with PMIC
  • Android™, Yocto Project Linux® and Windows® Embedded Compact software platform support
  • Reliable design with IEC 60068 and HALT verification
  • Designed for long-term availability
Add to compare
Digi XBee-PRO 900HP RF Modems

Digi XBee-PRO 900HP RF Modems

900 MHz stand-alone RF modems provide outstanding range (up to 28 miles)* in a reliable wireless solution

  • Industrial design with -40° C to 85° C operating temperature
  • Superior outdoor LOS range of up to 28 Miles*
  • RF data throughput up to 200 Kbps
  • 900 MHz license-free ISM band operation
  • Interface options include RS-232, RS-485, USB and Ethernet
  • DigiMesh® peer-to-peer mesh networking protocol
    • Self-healing and discovery for network stability
  • Includes mini-USB port for simnple device configuration
Add to compare
Rabbit<span>®</span> SBC BL2600 Series

Rabbit SBC BL2600 Series

NRND

Ethernet-Enabled Single-Board Computer

  • Rabbit® 3000 microprocessor at 44 MHz
  • 10/100Base-T Ethernet, RJ-45
  • 512K Flash/512K SRAM
  • 36 digital I/O (configurations include protected digital inputs, sinking/sourcing outputs, high current outputs)
  • 12 analog channels: eight 11-bit A/D, four 12-bit D/A buffered outputs
Add to compare
Digi Connect ME®

Digi Connect ME

NRND

Secure Network Device Server Module

  • Integrated 10/100 Mbit Ethernet interface
  • Strong enterprise-grade network security
  • Common family footprint for wired and wireless modules
  • High-speed serial interface (UART)
Add to compare
Rabbit<span>®</span> SBC BL2100 Series

Rabbit SBC BL2100 Series

NRND

Single-Board Computer

  • 40 sinking/sourcing digital I/O
  • Up to 512K Flash for program and up to 512K SRAM for data
  • 16 digital outputs which can sink/source 200 mA
  • 11 A/D and 4 D/A with 12-bit resolution
  • Up to 4 serial ports: two 3-wire (or one 5-wire) RS-232 and 1 RS-485
Add to compare
XTend<span>®</span> 900MHz RF Modems

XTend RF 900MHz Modems

1 Watt/900 MHz stand-alone radio modems

  • Outdoor line-of-sight range up to 40 miles* (with high gain antenna)
  • Outstanding receiver sensitivity (-110 dBm @9600 bps)
Add to compare
Digi Connect ME<span>®</span> 9210

Digi Connect ME 9210

NRND

Intelligent Ethernet Connectivity in RJ-45 Form Factor

  • Wired 10/100 Ethernet network interface
  • Industrial operating temperature
  • RJ-45 form factor compatible with Digi Connect Wi-ME
  • Support for Digi Embedded Linux and NET+OS
Add to compare
Digi XBee Mobile App

Digi XBee Mobile App

Local Bluetooth enabled network management

  • iOS and Android compatible mobile app
  • Enables wireless Digi XBee® configuration via Bluetooth from a mobile device
  • Configure, commission, troubleshoot and update Digi XBee 3 and XBee RR modules wirelessly and securely on-site
  • Connects to Digi XBee 3 and XBee RR modules via Bluetooth
  • Learn more in the Configuration with the Digi XBee Mobile App tutorial
Add to compare
Digi ConnectCard™ for i.MX28

Digi ConnectCard for i.MX28

NRND

NXP/Freescale i.MX28 ARM9 SoM

  • Cost-effective design in compact form factor
  • 32-bit ARM processor at up to 454 MHz
  • Single/dual 10/100 Ethernet connectivity options
  • Pre-certified 802.11a/b/g/n Wi-Fi + Bluetooth® 4.0
  • Support for Yocto Project Linux, Digi Embedded Linux, and Android
Add to compare
Rabbit<span>®</span> OP7200 eDisplay

Rabbit OP7200 eDisplay

NRND

Ethernet-Intelligent Operator Interface

  • Rabbit® 2000 microprocessor at 22 MHz
  • ¼ VGA display (320 x 240 pixels)
  • 10Base-T Ethernet, RJ-45
  • 256K Flash/128K SRAM
  • 24-27 industrialized I/O and 4 CMOS-compatible serial ports
Add to compare
Digi ConnectCore® i.MX51 / Wi-i.MX51

Digi ConnectCore i.MX51 / Wi-i.MX51

NRND

NXP/Freescale i.MX51 Cortex A8 SoM

  • Integrated secure wireless 802.11a/b/g/n Wi-Fi LAN
  • Powerful 2D/3D graphics and 720p video
  • Support for Embedded Linux, Microsoft Windows Compact 7, Windows CE 6.0, Android, and Yocto Project Linux
  • Industrial operating temperature
Add to compare
Digi ConnectCore<span>®</span> i.MX53 / Wi-i.MX53

Digi ConnectCore i.MX53 / Wi-i.MX53

NRND

NXP/Freescale i.MX53 Cortex A8 SoM

  • High-performance 32-bit System-on-Module
  • Long-term product availability solution
  • Single and dual 10/100 Mbit Ethernet networking
  • Pre-certified 802.11a/b/g/n Wi-Fi interface
  • High-performance 2D/3D Graphics Processing Unit
  • Hardware video processing with 1080p decoding
  • Low-emission design with FCC Class B compliance
  • Zigbee, cellular and satellite connectivity options
  • Industrial operating temperature support
  • Support for Embedded Linux®, Microsoft Windows® Compact 7, Android™, and Yocto Project® Linux
Add to compare
Rabbit<span>®</span> MiniCore<span>®</span> RCM6700 Series

Rabbit MiniCore RCM6700 Series

NRND

Embedded Device Servers

  • Rabbit® 6000 running up to 200 MHz
  • 10/100 Ethernet and pin-compatible with MiniCore 802.11b/g wireless modules
  • 1 MB of internal RAM for program storage
  • Up to 4 MB of serial Flash for data logging or web page storage
Add to compare
RabbitCore<span>®</span> RCM3000 Series

RabbitCore RCM3000 Series

NRND

Microprocessor Core Module

  • Rabbit 3000 microprocessor at 30 MHz
  • Up to 512K Flash/512K SRAM
  • 52 digital I/O and 6 serial ports (IrDA, HDLC, asynch, SPI)
  • 3.3V operation, low power “sleepy” modes (< 2mA)
Add to compare
RabbitCore<span>®</span> RCM3100 Series

RabbitCore RCM3100 Series

NRND

Microprocessor Core Module

  • Rabbit 3000 microprocessor at 30 MHz
  • Up to 512K Flash/512K SRAM
  • 54 digital I/O and 6 serial ports (IrDA, HDLC, asynch, SPI)
  • 3.3V operation, low power “sleepy” modes (< 2mA)
Add to compare
RabbitCore<span>®</span> RCM3209 Series

RabbitCore RCM3209 Series

NRND

Microprocessor Core Module

  • Rabbit 3000 microprocessor at 44 MHz
  • Optional 10/100Base-T Ethernet
  • 512K Flash / 256K SRAM / 512K Program Execution SRAM
  • 52 digital I/O and 6 serial ports for multiple connectivity options
Add to compare
RabbitCore<span>®</span> RCM3400 Series

RabbitCore RCM3400 Series

NRND

Microprocessor Core Module

  • Rabbit 3000 microprocessor at 30 MHz
  • Up to 512K Flash/512K SRAM
  • 8 channel 12-bit A/D with programmable gain
  • 47 digital I/O and 5 serial ports (IrDA, HDLC, asynch, SPI)
Add to compare
RabbitCore<span>®</span> RCM3600 Series

RabbitCore RCM3600 Series

NRND

Microprocessor Core Module

  • Rabbit 3000 microprocessor at 22 MHz
  • Up to 512K Flash/512K SRAM
  • 33 parallel digital I/O with configurable options
  • 4 serial ports (IrDA, HDLC, async, SPI)
Add to compare
RabbitCore<span>®</span> RCM3700 Series

RabbitCore RCM3700 Series

NRND

Microprocessor Core Module

  • Up to 4 serial ports for multiple device connectivity
  • 10Base-T with optional 10/100Base-T Ethernet
  • Up to 512K Flash for code and up to 512K SRAM for data
  • 1 MB of on-board serial Flash utilizing FAT file support
Add to compare
RabbitCore<span>®</span> RCM3900 Series

RabbitCore RCM3900 Series

NRND

Microprocessor Core Module

  • Rabbit® 3000 microprocessor at 44 MHz
  • Extended operating temperature range: -20° C to +80° C
  • 10/100Base-T Ethernet
  • Up to 1 GB microSD hot-swappable storage
Add to compare
RabbitCore<span>®</span> RCM4000 Series

RabbitCore RCM4000 Series

NRND

Communications and Control Processor

  • Rabbit 4000 running at 59 MHz
  • Up to 1 MB (16-bit) Program Flash, 1 MB (16-bit) SRAM, and 32 MB of Flash memory
  • 10Base-T Ethernet (RJ-45 connector)
  • Up to 28 GPIO and up to 5 serial ports
  • 8 channels 12-bit A/D converter
Add to compare
RabbitCore<span>®</span> RCM4100 Series

RabbitCore RCM4100 Series

NRND

Microprocessor Core Module

  • Rabbit 4000 running up to 59 MHz
  • 512K Flash, 256K / 512K Data SRAM
  • Up to 40 GPIO, up to 6 CMOS-compatible serial ports
  • Auxiliary I/O feature for reducing processor bus loading
Add to compare
RabbitCore<span>®</span> RCM4200 Series

RabbitCore RCM4200 Series

NRND

Microprocessor Core Module

  • Rabbit 4000 running at 59 MHz
  • 10/100Base-T Ethernet, RJ-45 jack
  • 512K Flash / 512K Data SRAM
  • 4 MB or 8 MB Serial Flash for data storage
Add to compare
RabbitCore<span>®</span> RCM4300 Series

RabbitCore RCM4300 Series

NRND

Microprocessor Core Module

  • Rabbit 4000 running at 58.98 MHz
  • Supports microSD and microSDHC memory cards, 1 MB SRAM for shared code, 512K of battery-backed SRAM, FAT file organization
  • 10/100Base-T Ethernet, 36 GPIO, 6 serial ports
  • 8 channel 12-bit resolution (RCM4300 only)
  • Embedded web server
Add to compare
AnywhereUSB Plus

AnywhereUSB Plus

Connect USB peripheral devices anywhere on a Local Area Network (LAN) via Ethernet or Wi-Fi without a locally-attached host computer

  • Network-attached USB hubs easily connect USB peripheral devices to a PC from remote or virtual hosts
  • Ideal for connecting USB devices over the network in virtualized environments such as VMware®
  • AnywhereUSB 24 Plus is rack mountable with two power supplies and Ethernet connections for failover redundancy
  • Access and monitor USB and serial devices over TCP/IP connection
  • Supports multi-host connectivity for each USB port or group independently
  • Supports Digi Remote Manager® cloud-based management platform to deploy, monitor, manage and maintain a suite of peripherals and devices
Add to compare
Digi Connect EZ Mini/2/4

Digi Connect EZ Mini/2/4

Click-to-connect | Modern, secure serial connectivity that boots in seconds, configures in minutes and runs for years

  • 1, 2 or 4 software-selectable RS-232/422/485 serial ports to connect a wide variety of serial equipment over IP networks
  • 10/100/1000 Ethernet (dual Ethernet on 2- and 4-port), with optional Wi-Fi, industrial temp, C1D2 rating and LTE
  • Ideal for applications requiring COM ports, serial tunneling or TCP/UDP sockets
  • Optimizes performance for the widest range of industry standard and device-specific protocols
  • Built-in Digi TrustFence® for device security, secure encrypted connections, ongoing monitoring and support
  • Easy setup and mass configuration with Digi Navigator™ and Digi Remote Manager®

New Digi Connect EZ 8 and 16/32 are also now available.

Add to compare
PortServer TS MEI

PortServer TS MEI

NRND

RS-232/422/485 Switch Selectable Expansion for Asynchronous Connectivity

  • RS-232/422/485 switch selectable serial ports
  • 1, 2 or 4 serial ports
  • Serial port expansion for manufacturing floor, gas pump, Industrial Automation
  • RealPort® with encryption provides SSL-based protection
  • SSHv2 for encrypted connections
Add to compare
Digi One IAP Family

Digi One IAP Family

Multi-Protocol Conversion Capabilities for Automation Integration

  • Industrial serial server and protocol bridge
  • Hardened 1-port device server for hazardous locations
  • Multi-master/multi-protocol support
  • Conformal coated circuit board
  • Device server with 1 DB-9 serial port plus pass-through port
Add to compare
Digi XBee SX 868 RF Module

Digi XBee SX 868 RF Module

RF module family operates in the 863-870 MHz range delivering superior performance and interference immunity at 868 MHz

  • Low-power CE/RED certified 868 MHz RF module based on Silabs EFM32 and ADI7023
  • Design includes SAW filter for optimal performance in noisy RF environments
  • OTA and pin compatible with legacy Digi XBee® 868LP
  • Listen-Before-Talk and Frequency Agility for optimal interference immunity
  • DigiMesh® networking topology for redundancy and reliability
  • Simple configuration using XCTU® accelerates time to market
Add to compare
Digi XBee SX 900 RF Module

Digi XBee SX 900 RF Module

900 MHz OEM RF modules pack maximum power, security, and flexibility into the Digi XBee SMT footprint for mission-critical wireless designs

  • Family includes powerful 1-Watt 900 MHz Digi XBee-PRO SX 900 and battery-optimized 20 mW Digi XBee SX 900 modules for mission-critical OEM designs
  • DigiMesh networking topology for redundancy and reliability
  • Design includes SAW filter for optimal performance in noisy RF environments
  • 256-bit AES encryption for secure data communications
  • Digi XBee SMT form factor saves valuable PCB space
  • Fully certified for use in unlicensed 900 MHz band
Add to compare
Digi One SP

Digi One SP

NRND

Cost-effective serial-to-Ethernet connectivity in a compact design for simple data communication applications

  • Patented RealPort® for COM/TTY port control and management
  • TCP/UDP Socket Services for broad device connectivity and application use
  • Auto-connect the serial device to networked server using raw, Telnet, rlogin
  • Reverse Telnet for easy access of serial devices from network
  • Switch selectable RS-232/422/485 for simple interfacing to any type of serial device
  • Modem emulation allows support for devices designed only for modem communications
Add to compare
Digi XBee RR Zigbee RF Module

Digi XBee RR Zigbee RF Module

New

Easy-to-add Zigbee RF connectivity in a compact, low-power, low-profile footprint

  • Size and Flexibility
    • At 13 mm x 19 mm, the new Digi XBee® RR micro form factor allows for more compact and portable applications
    • Digi XBee RR is one module for all protocols including: Zigbee, 802.15.4, DigiMesh® and BLE (slave only), all configurable via Digi XCTU® and the Digi XBee Mobile App
  • Security and Management
    • Intrinsic IoT security with Digi TrustFence®, a layered approach securing the edge device, through the gateway, into and out of the IoT
    • Connect Digi XBee RR with the Digi IX15 IoT gateway and router to configure, monitor and control your network with Digi Remote Manager®
Add to compare
Digi XBee-PRO 900HP RF Module

Digi XBee-PRO 900HP RF Module

Long Range 900 MHz OEM RF Module

  • Superior LOS range of up to 28 miles* with high-gain antenna
  • Simplified AT command set and advanced XBee API 
  • Over-the-air firmware updates
  • Software-selectable channel mask for interference immunity
  • Advanced sleep modes: sleeping routers, pin sleep, cyclic sleep
  • Try these modules out with a XBee-PRO 900HP DigiMesh Kit
Add to compare
Digi XBee<span>®</span> 802.15.4

Digi XBee 802.15.4

NRND

Low-cost, easy-to-deploy RF modules provide critical end-point connectivity to devices and sensors

  • Simple, out-of-the-box RF communications, no configuration needed
  • Point-to-multipoint network topology
  • 2.4 GHz for worldwide deployment
  • Common XBee footprint for a variety of RF modules
  • Industry leading sleep current of sub 1uA
  • Firmware upgrades via UART, SPI or over the air
  • Migratable to DigiMesh and Zigbee PRO protocols and vice-versa
  • Turnkey development available from Digi WDS
Add to compare